TestProject.cpp:
#include "Arduino.h"
void setup() {
pinMode(13, OUTPUT);
}
void loop() {
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(950);
}
Why doesn't successfully compiled How to compile code run onfor the Arduino Due?
TestProject.cpp:
#include "Arduino.h"
void setup() {
pinMode(13, OUTPUT);
}
void loop() {
digitalWrite(13, HIGH);
delay(50);
digitalWrite(13, LOW);
delay(950);
}
There is one static library (ArduinoDueCore) consisting of the Arduino library (core), and other code (Atmel found in lib). The other Eclipse project is the TestProject. It contains one file blinking an LED on pin 13. All the files from the Arduino library are there.
This is the output from Eclipse compiling the library itself: http://pastebin.com/EK9bmc1Q (too big for the questionexcerpt of only one of each type of command)
18:31:36 **** Build of configuration Release for project ArduinoDueCore ****
make all
Building file: ../src/lib/variants/arduino_due_x/variant.cpp
Invoking: ARM Sourcery Linux GCC C++ Compiler
arm-none-eabi-g++ -DUSB_PRODUCT="Arduino Due" -DARDUINO=156 -DUSB_MANUFACTURER="Unknown" -DARDUINO_ARCH_SAM -DARDUINO_SAM_DUE -D__SAM3X8E__ -Dprintf=iprintf -DF_CPU=84000000L -DUSB_VID=0x2341 -DUSB_PID=0x003E -DUSBCON -I"/home/kim/workspace_juno/ArduinoDueCore/src/core" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/CMSIS/Include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL/sam3xa/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/variants/arduino_due_x" -Os -ffunction-sections -fdata-sections -Wall -Wa,-adhlns="src/lib/variants/arduino_due_x/variant.o.lst" -fno-exceptions -fno-rtti -w -c -g -fmessage-length=0 --param max-inline-insns-single=500 -nostdlib -MMD -MP -MF"src/lib/variants/arduino_due_x/variant.d" -MT"src/lib/variants/arduino_due_x/variant.d" -mcpu=cortex-m3 -mthumb -o "src/lib/variants/arduino_due_x/variant.o" "../src/lib/variants/arduino_due_x/variant.cpp"
Finished building: ../src/lib/variants/arduino_due_x/variant.cpp
Building file: ../src/lib/libsam/source/adc.c
Invoking: ARM Sourcery Linux GCC C Compiler
arm-none-eabi-gcc -DARDUINO=156 -DARM_MATH_CM3 -DUSB_MANUFACTURER="Unknown" -DARDUINO_ARCH_SAM -DARDUINO_SAM_DUE -D__SAM3X8E__ -Dprintf=iprintf -DF_CPU=84000000L -DUSB_VID=0x2341 -DUSB_PRODUCT="Arduino Due" -DUSB_PID=0x003E -DUSBCON -I"/home/kim/workspace_juno/ArduinoDueCore/src/core" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/CMSIS/Include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL/sam3xa/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/variants/arduino_due_x" -Os -ffunction-sections -fdata-sections -Wall -Wa,-adhlns="src/lib/libsam/source/adc.o.lst" -w -c -fmessage-length=0 --param max-inline-insns-single=500 -nostdlib -std=c99 -MMD -MP -MF"src/lib/libsam/source/adc.d" -MT"src/lib/libsam/source/adc.d" -mcpu=cortex-m3 -mthumb -o "src/lib/libsam/source/adc.o" "../src/lib/libsam/source/adc.c"
Finished building: ../src/lib/libsam/source/adc.c
Building file: ../src/core/USB/HID.cpp
Invoking: ARM Sourcery Linux GCC C++ Compiler
arm-none-eabi-g++ -DUSB_PRODUCT="Arduino Due" -DARDUINO=156 -DUSB_MANUFACTURER="Unknown" -DARDUINO_ARCH_SAM -DARDUINO_SAM_DUE -D__SAM3X8E__ -Dprintf=iprintf -DF_CPU=84000000L -DUSB_VID=0x2341 -DUSB_PID=0x003E -DUSBCON -I"/home/kim/workspace_juno/ArduinoDueCore/src/core" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/CMSIS/Include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL/sam3xa/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/variants/arduino_due_x" -Os -ffunction-sections -fdata-sections -Wall -Wa,-adhlns="src/core/USB/HID.o.lst" -fno-exceptions -fno-rtti -w -c -g -fmessage-length=0 --param max-inline-insns-single=500 -nostdlib -MMD -MP -MF"src/core/USB/HID.d" -MT"src/core/USB/HID.d" -mcpu=cortex-m3 -mthumb -o "src/core/USB/HID.o" "../src/core/USB/HID.cpp"
Finished building: ../src/core/USB/HID.cpp
Building file: ../src/core/cortex_handlers.c
Invoking: ARM Sourcery Linux GCC C Compiler
arm-none-eabi-gcc -DARDUINO=156 -DARM_MATH_CM3 -DUSB_MANUFACTURER="Unknown" -DARDUINO_ARCH_SAM -DARDUINO_SAM_DUE -D__SAM3X8E__ -Dprintf=iprintf -DF_CPU=84000000L -DUSB_VID=0x2341 -DUSB_PRODUCT="Arduino Due" -DUSB_PID=0x003E -DUSBCON -I"/home/kim/workspace_juno/ArduinoDueCore/src/core" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/CMSIS/Include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL/sam3xa/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/variants/arduino_due_x" -Os -ffunction-sections -fdata-sections -Wall -Wa,-adhlns="src/core/cortex_handlers.o.lst" -w -c -fmessage-length=0 --param max-inline-insns-single=500 -nostdlib -std=c99 -MMD -MP -MF"src/core/cortex_handlers.d" -MT"src/core/cortex_handlers.d" -mcpu=cortex-m3 -mthumb -o "src/core/cortex_handlers.o" "../src/core/cortex_handlers.c"
Finished building: ../src/core/cortex_handlers.c
18:31:39 Build Finished (took 2s.811ms)
Here is the project itself: http://pastebin.com/2GCXP0L1
18:33:42 **** Build of configuration Release for project TestProject ****
make all
Building file: ../src/TestProject.cpp
Invoking: ARM Sourcery Linux GCC C++ Compiler
arm-none-eabi-g++ -DARDUINO=156 -DUSB_PRODUCT="Arduino Due" -DARDUINO_SAM_DUE -D__SAM3X8E__ -DARDUINO_ARCH_SAM -Dprintf=iprintf -DF_CPU=84000000L -DUSB_MANUFACTURER="Unknown" -DUSB_VID=0x2341 -DUSB_PID=0x003E -DUSBCON -I"/home/kim/workspace_juno/ArduinoDueCore/src/core" -I"/home/kim/workspace_juno/TestProject/src" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/variants/arduino_due_x" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/CMSIS/Include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL/sam3xa/include" -Os -ffunction-sections -fdata-sections -Wall -fno-exceptions -fno-rtti -c -fmessage-length=0 --param max-inline-insns-single=500 -nostdlib -g -w -MMD -MP -MF"src/TestProject.d" -MT"src/TestProject.d" -mcpu=cortex-m3 -mthumb -o "src/TestProject.o" "../src/TestProject.cpp"
Finished building: ../src/TestProject.cpp
Building target: TestProject.elf
Invoking: ARM Sourcery Linux GCC C++ Linker
arm-none-eabi-g++ -T"/home/kim/workspace_juno/ArduinoDueCore/src/lib/variants/arduino_due_x/linker_scripts/gcc/flash.ld" -L"/home/kim/workspace_juno/ArduinoDueCore/Release" -Wl,-Map,TestProject.map -lm -lgcc -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=Reset_Handler -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols -Wl,--gc-sections -mcpu=cortex-m3 -mthumb -o "TestProject.elf" -Wl,--start-group ./src/TestProject.o -lArduinoDueCore -Wl,--end-group
Finished building target: TestProject.elf
make --no-print-directory post-build
/home/kim/arduino-1.5.6-r2/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-objcopy -O binary TestProject.elf TestProject.bin
Invoking: ARM Sourcery Linux GNU Create Listing
arm-none-eabi-objdump -h -S TestProject.elf > "TestProject.lst"
Finished building: TestProject.lst
Invoking: ARM Sourcery Linux GNU Print Size
arm-none-eabi-size --format=berkeley TestProject.elf
text data bss dec hex filename
10396 24 1188 11608 2d58 TestProject.elf
Finished building: TestProject.siz
18:33:43 Build Finished (took 308ms)
Here is the upload command: http://pastebin.com/t8dcYy8q(removed readWord, go, write and writeWord lines)
-i -d --port=ttyACM0 -U true -e -w -v -b ${project_loc}/Release/${project_name}.bin -R
Set binary mode
chipId=0x285e0a60
Connected at 921600 baud
Erase flash
Write 10420 bytes to flash
[ ] 0% (0/41 pages)
[======= ] 24% (10/41 pages)
[============== ] 48% (20/41 pages)
[===================== ] 73% (30/41 pages)
[============================= ] 97% (40/41 pages)
[==============================] 100% (41/41 pages)
Verify 10420 bytes of flash
[ ] 0% (0/41 pages)
[======= ] 24% (10/41 pages)
[============== ] 48% (20/41 pages)
[===================== ] 73% (30/41 pages)
[============================= ] 97% (40/41 pages)
[==============================] 100% (41/41 pages)
Verify successful
Set boot flash true
Device : ATSAM3X8
Chip ID : 285e0a60
version()=v1.1 Dec 15 2010 19:25:04
Version : v1.1 Dec 15 2010 19:25:04
Address : 524288
Pages : 2048
Page Size : 256 bytes
Total Size : 512KB
Planes : 2
Lock Regions : 32
Locked : none
Security : false
Boot Flash : true
CPU reset.
This is the output from Eclipse compiling the library itself: http://pastebin.com/EK9bmc1Q (too big for the question)
Here is the project itself: http://pastebin.com/2GCXP0L1
Here is the upload command: http://pastebin.com/t8dcYy8q
There is one static library (ArduinoDueCore) consisting of the Arduino library (core), and other code (Atmel found in lib). The other Eclipse project is the TestProject. It contains one file blinking an LED on pin 13. All the files from the Arduino library are there.
This is the output from Eclipse compiling the library itself: (excerpt of only one of each type of command)
18:31:36 **** Build of configuration Release for project ArduinoDueCore ****
make all
Building file: ../src/lib/variants/arduino_due_x/variant.cpp
Invoking: ARM Sourcery Linux GCC C++ Compiler
arm-none-eabi-g++ -DUSB_PRODUCT="Arduino Due" -DARDUINO=156 -DUSB_MANUFACTURER="Unknown" -DARDUINO_ARCH_SAM -DARDUINO_SAM_DUE -D__SAM3X8E__ -Dprintf=iprintf -DF_CPU=84000000L -DUSB_VID=0x2341 -DUSB_PID=0x003E -DUSBCON -I"/home/kim/workspace_juno/ArduinoDueCore/src/core" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/CMSIS/Include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL/sam3xa/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/variants/arduino_due_x" -Os -ffunction-sections -fdata-sections -Wall -Wa,-adhlns="src/lib/variants/arduino_due_x/variant.o.lst" -fno-exceptions -fno-rtti -w -c -g -fmessage-length=0 --param max-inline-insns-single=500 -nostdlib -MMD -MP -MF"src/lib/variants/arduino_due_x/variant.d" -MT"src/lib/variants/arduino_due_x/variant.d" -mcpu=cortex-m3 -mthumb -o "src/lib/variants/arduino_due_x/variant.o" "../src/lib/variants/arduino_due_x/variant.cpp"
Finished building: ../src/lib/variants/arduino_due_x/variant.cpp
Building file: ../src/lib/libsam/source/adc.c
Invoking: ARM Sourcery Linux GCC C Compiler
arm-none-eabi-gcc -DARDUINO=156 -DARM_MATH_CM3 -DUSB_MANUFACTURER="Unknown" -DARDUINO_ARCH_SAM -DARDUINO_SAM_DUE -D__SAM3X8E__ -Dprintf=iprintf -DF_CPU=84000000L -DUSB_VID=0x2341 -DUSB_PRODUCT="Arduino Due" -DUSB_PID=0x003E -DUSBCON -I"/home/kim/workspace_juno/ArduinoDueCore/src/core" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/CMSIS/Include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL/sam3xa/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/variants/arduino_due_x" -Os -ffunction-sections -fdata-sections -Wall -Wa,-adhlns="src/lib/libsam/source/adc.o.lst" -w -c -fmessage-length=0 --param max-inline-insns-single=500 -nostdlib -std=c99 -MMD -MP -MF"src/lib/libsam/source/adc.d" -MT"src/lib/libsam/source/adc.d" -mcpu=cortex-m3 -mthumb -o "src/lib/libsam/source/adc.o" "../src/lib/libsam/source/adc.c"
Finished building: ../src/lib/libsam/source/adc.c
Building file: ../src/core/USB/HID.cpp
Invoking: ARM Sourcery Linux GCC C++ Compiler
arm-none-eabi-g++ -DUSB_PRODUCT="Arduino Due" -DARDUINO=156 -DUSB_MANUFACTURER="Unknown" -DARDUINO_ARCH_SAM -DARDUINO_SAM_DUE -D__SAM3X8E__ -Dprintf=iprintf -DF_CPU=84000000L -DUSB_VID=0x2341 -DUSB_PID=0x003E -DUSBCON -I"/home/kim/workspace_juno/ArduinoDueCore/src/core" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/CMSIS/Include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL/sam3xa/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/variants/arduino_due_x" -Os -ffunction-sections -fdata-sections -Wall -Wa,-adhlns="src/core/USB/HID.o.lst" -fno-exceptions -fno-rtti -w -c -g -fmessage-length=0 --param max-inline-insns-single=500 -nostdlib -MMD -MP -MF"src/core/USB/HID.d" -MT"src/core/USB/HID.d" -mcpu=cortex-m3 -mthumb -o "src/core/USB/HID.o" "../src/core/USB/HID.cpp"
Finished building: ../src/core/USB/HID.cpp
Building file: ../src/core/cortex_handlers.c
Invoking: ARM Sourcery Linux GCC C Compiler
arm-none-eabi-gcc -DARDUINO=156 -DARM_MATH_CM3 -DUSB_MANUFACTURER="Unknown" -DARDUINO_ARCH_SAM -DARDUINO_SAM_DUE -D__SAM3X8E__ -Dprintf=iprintf -DF_CPU=84000000L -DUSB_VID=0x2341 -DUSB_PRODUCT="Arduino Due" -DUSB_PID=0x003E -DUSBCON -I"/home/kim/workspace_juno/ArduinoDueCore/src/core" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/CMSIS/Include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL/sam3xa/include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/variants/arduino_due_x" -Os -ffunction-sections -fdata-sections -Wall -Wa,-adhlns="src/core/cortex_handlers.o.lst" -w -c -fmessage-length=0 --param max-inline-insns-single=500 -nostdlib -std=c99 -MMD -MP -MF"src/core/cortex_handlers.d" -MT"src/core/cortex_handlers.d" -mcpu=cortex-m3 -mthumb -o "src/core/cortex_handlers.o" "../src/core/cortex_handlers.c"
Finished building: ../src/core/cortex_handlers.c
18:31:39 Build Finished (took 2s.811ms)
Here is the project itself:
18:33:42 **** Build of configuration Release for project TestProject ****
make all
Building file: ../src/TestProject.cpp
Invoking: ARM Sourcery Linux GCC C++ Compiler
arm-none-eabi-g++ -DARDUINO=156 -DUSB_PRODUCT="Arduino Due" -DARDUINO_SAM_DUE -D__SAM3X8E__ -DARDUINO_ARCH_SAM -Dprintf=iprintf -DF_CPU=84000000L -DUSB_MANUFACTURER="Unknown" -DUSB_VID=0x2341 -DUSB_PID=0x003E -DUSBCON -I"/home/kim/workspace_juno/ArduinoDueCore/src/core" -I"/home/kim/workspace_juno/TestProject/src" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/libsam" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/variants/arduino_due_x" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/CMSIS/Include" -I"/home/kim/workspace_juno/ArduinoDueCore/src/lib/CMSIS/Device/ATMEL/sam3xa/include" -Os -ffunction-sections -fdata-sections -Wall -fno-exceptions -fno-rtti -c -fmessage-length=0 --param max-inline-insns-single=500 -nostdlib -g -w -MMD -MP -MF"src/TestProject.d" -MT"src/TestProject.d" -mcpu=cortex-m3 -mthumb -o "src/TestProject.o" "../src/TestProject.cpp"
Finished building: ../src/TestProject.cpp
Building target: TestProject.elf
Invoking: ARM Sourcery Linux GCC C++ Linker
arm-none-eabi-g++ -T"/home/kim/workspace_juno/ArduinoDueCore/src/lib/variants/arduino_due_x/linker_scripts/gcc/flash.ld" -L"/home/kim/workspace_juno/ArduinoDueCore/Release" -Wl,-Map,TestProject.map -lm -lgcc -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=Reset_Handler -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols -Wl,--gc-sections -mcpu=cortex-m3 -mthumb -o "TestProject.elf" -Wl,--start-group ./src/TestProject.o -lArduinoDueCore -Wl,--end-group
Finished building target: TestProject.elf
make --no-print-directory post-build
/home/kim/arduino-1.5.6-r2/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-objcopy -O binary TestProject.elf TestProject.bin
Invoking: ARM Sourcery Linux GNU Create Listing
arm-none-eabi-objdump -h -S TestProject.elf > "TestProject.lst"
Finished building: TestProject.lst
Invoking: ARM Sourcery Linux GNU Print Size
arm-none-eabi-size --format=berkeley TestProject.elf
text data bss dec hex filename
10396 24 1188 11608 2d58 TestProject.elf
Finished building: TestProject.siz
18:33:43 Build Finished (took 308ms)
Here is the upload command: (removed readWord, go, write and writeWord lines)
-i -d --port=ttyACM0 -U true -e -w -v -b ${project_loc}/Release/${project_name}.bin -R
Set binary mode
chipId=0x285e0a60
Connected at 921600 baud
Erase flash
Write 10420 bytes to flash
[ ] 0% (0/41 pages)
[======= ] 24% (10/41 pages)
[============== ] 48% (20/41 pages)
[===================== ] 73% (30/41 pages)
[============================= ] 97% (40/41 pages)
[==============================] 100% (41/41 pages)
Verify 10420 bytes of flash
[ ] 0% (0/41 pages)
[======= ] 24% (10/41 pages)
[============== ] 48% (20/41 pages)
[===================== ] 73% (30/41 pages)
[============================= ] 97% (40/41 pages)
[==============================] 100% (41/41 pages)
Verify successful
Set boot flash true
Device : ATSAM3X8
Chip ID : 285e0a60
version()=v1.1 Dec 15 2010 19:25:04
Version : v1.1 Dec 15 2010 19:25:04
Address : 524288
Pages : 2048
Page Size : 256 bytes
Total Size : 512KB
Planes : 2
Lock Regions : 32
Locked : none
Security : false
Boot Flash : true
CPU reset.
Loading